Women of the world, you must look upon home repair and building as an adventure in which you enter a world smelling of particle board, freshly cut lumber, adhesives and all the screws you could ever imagine! (You’re making that dirty. I see the look on your face). I must make skirting my camper first priority. This is what it will look like (except much smaller since I have a tiny camper and not a full size mobile home :
I have to skirt before I improve the inside as the skirting is necessary before winter. One project at a time.
So after turning over the possibilities (treated plywood with foam insulation or treated chipboard with foam insulation?) for skirting for my little camper which I am required by the mobile home park to skirt for the winter, (it’s really best for me as it will keep the camper warmer by blocking cold air from blowing underneath and coming up into the floor)—I went to Menards on a mission to find someone who could be my Virgil on the journey to Paradise (a ha! You thought I’d say hell! No! Building should be fun! You should feel empowered and accomplished while you’re doing your home jobs!)
So I found a pleasant young man who calculated what I’d need. I have a 7 x 14′ camper. Here’s what he came up with:
Now, to be fair, I hadn’t even thought of vinyl skirting. I thought I’d use treated plywood (so it doesn’t rot in winter snows and thaws), but it turns out plywood was ten dollars more! Vinyl is easy to instal. You have your top rail which you can use locking screws to attach to the camper, which the skirt slides into which for me needs to be 3′ from ground to place on camper where I’ll attach it) . I only need 2′ 5″ to 3′ of skirt to cover the space from the ground to a foot up the wall of the camper. I need 13’5″ long of skirt for each side 2′ 5″ to 3′ foot high-and 7′ long for the ends. The bottom channel is for the bottom of the skirt to slide into so it sits on the ground evenly.
Now I can glue foam insulation to the back of the skirt to reinforce it which I will probably do. Here that is: (inch and three quarter thick)…
All I have to do is glue the skirt onto the foam board and cut the foam to an inch below where I’ll slide it into the channel after I cut it the three foot width I want–I was thinking originally of doing a width of two and a half feet of skirt but three feet sounds like a good number.
How much will it cost for the supplies that I need for my skirt?
Probably 175.00 with tax. I’m saving about 350.00 a month in rent and utilities remember, so even after deducting the skirt materials which I only have to buy and install once, I will come out ahead.
I can’t wait to get my first electric bill to see how much I’m saving living in my camper. I switch off the breaker when I go to work during the day. No sense having the electric on while I’m not there. So far I have used a small amount of kilowatt hours but since I’ve never lived in a camper before, I really don’t know how much it costs to plug one in. I will share the bill with you when I get it!
Dottie, the tattooed lady who has a saw, has offered to help me skirt my camper so I will not be a woman alone in doing this project! I will have a woman teaching me, which is even better!
Don’t be afraid to ask questions no matter how stupid you think they are, when you are learning to put in insulation or skirting or framing up a bed or whatever you want to repair. Guys are awfully glad to give you different ways of fixing things and there are a lot of women who know how to do these things too. As a teacher, I’m here to tell you the only stupid question is the one you don’t ask. Don’t be afraid of looking inept. If you don’t ask for help you don’t learn!
I learned to use a caulking gun tonight too. I was posing like Charlie’s Angels with it
and the teenaged girl helping me load the tube of Liquid Nails was laughing so hard she couldn’t hardly stand.
I won’t get the Liquid Nails or the caulking gun till later because that’s for the inside.
Skirting first. Skirts are fun!! See?